Clips & Pins for Scaffolding
Coupling Pin for Scaffolding
Coupling pins are used to connect scaffolding frames together vertically. The pins fit on the inside of the frame and are used in conjunction with span pins, toggle pins, and clips to hold them in place.
Safeway-style (blue) scaffolding requires a 9" X 1-7/16" pin, meaning the pin is 9" long and 1-7/16" in diameter.
Waco-style (red) scaffolding requires a 7" X 1-3/8" pin.
Bil-Jax-style (yellow) scaffolding requires a 9" X 1-3/8" pin.
Because of these different lengths and diameters, pins are not interchangeable between the different scaffolding styles, so it is important to make sure you have the right pin. In addition, Safeway frames have pin holes at a 45-degree angle to the horizontal member of the frame, while Waco and Bil-Jax style frames have a pin hole at a 90-degree angle, which means that the pin holes won't line up if you stack a Safeway frame on a Waco or Bil-Jax frame. We carry pins with or without a collar depending on customer preference.
Check out our other accessories here.
Clips & Pins for Scaffolding
Spring Clips - SWS-113
Our spring clips go on the inside of our coupling pins and are used to hold the pin in place once the pin is inside the scaffolding frame.
Scaffold Pins
Below are various scaffold pins that we carry. Many of them are interchangeable and may be used according to preference. Our toggle pins are usually paired with casters, guardrail posts and similar items. Our pig tail pins are usually paired with our veneer jacks.
Recent Posts
-
The Evolution of Pump Jacks
Construction has always been about balancing access, efficiency, and labor. For years, crews working …May 26th 2026 -
Walk Boards and Planking: The History of platforms
Every scaffold system depends on one critical component: the working platform. No matter how strong …May 25th 2026 -
Pulley Systems: How Material Lifting Changed the Job Site
One of the biggest challenges in construction has always been lifting materials. Brick, mortar, ston …May 22nd 2026