Coupling Pin for Scaffolding by Southwest Scaffolding
Coupling Pin for Scaffolding
Coupling pins are used to connect scaffolding frames together vertically. The pins fit on the inside of the frame and are used in conjunction with span pins, toggle pins, and clips to hold them in place.
Safeway-style (blue) scaffolding requires a 9" X 1-7/16" pin, meaning the pin is 9" long and 1-7/16" in diameter.
Waco-style (red) scaffolding requires a 7" X 1-3/8" pin.
Bil-Jax-style (yellow) scaffolding requires a 9" X 1-3/8" pin.
Because of these different lengths and diameters, pins are not interchangeable between the different scaffolding styles, so it is important to make sure you have the right pin. In addition, Safeway frames have pin holes at a 45 degree angle to the horizontal member of the frame, while Waco and Bil-Jax style frames have a pin hole at a 90 degree angle, which means that the pin holes won't line up if you stack a Safeway frame on a Waco or Bil-Jax frame. We carry pins with or without a collar depending on customer preference.
Check out our other accessories here.
Scaffold Pins
Scaffold pins are used to attach accessories to the scaffolding such as guardrail posts,screw jacks and more. Below are various scaffold pins that we carry. Many of them are interchangeable and may be used according to preference. Our toggle pins are usually paired with casters, guardrail posts and similar items. Our pig tail pins are usually paired with our veneer jacks.
Check out our other accessories here.
Recent Posts
-
The Physics Behind Fall Protection
When most people think about fall protection, they think about rules. Tie off above a certain height …Jul 15th 2026 -
How Wind Affects Scaffolding Stability
Most contractors pay attention to rain. They pay attention to lightning. They pay attention to extre …Jul 14th 2026 -
The Science of Construction Safety
When most people think about construction safety, they think about regulations. Hard hats. Guardrail …Jul 13th 2026