Solid Aluminum Scaffold Board
Our aluminum scaffold board comes in three different lengths:
5’X19″ SWS-1106 25 lbs
7’X19″ SWS-1101 30 lbs
10’X19″ SWS-1103 39 lbs
The advantage of these boards is their safety, stability, durability and load bearing capacity. They are rated for 75lbs/sq. ft and can be used in heavy-duty scaffolding applications. They are resistant to corrosion and will last you many years. These boards will also allow you to increase to a 10′ span and still have the load bearing capacity you need. The boards come with replaceable hooks and have a locking mechanism on each end of the board to keep the it attached to the scaffolding frames.
All of our boards have the same width of 19.” It takes aluminum boards to fully deck a set of scaffolding with 5′ wide frames. 42″ wide frames require 2 boards and 3′ wide frame will hold one board. Sometimes aluminum boards are used on outriggers. We have 21″ outriggers that will hold one aluminum board as well as 30″ outriggers that will hold two boards.
Aluminum boards have superior strength to wood boards and will last much longer. They make great landing platforms for materials in masonry and stucco applications and we recommend them for scaffolding towers because they stay in place much better than wood boards. The hooks on each end are offset so that these boards can be used to construct a single long scaffolding platform without the hooks overlapping each other.
Check out other scaffold plank options at SWS:
Aluminum Scaffold Board with Plywood Insert
Our Aluminum/Plywood Scaffold Planks function just like our solid aluminum planks except they have a plywood deck and they cost less. Like our solid aluminum boards, these boards are rated to hold 75 lbs./Sq. Ft. They come in 7′ and 10′ lengths. They weigh a little more than our solid aluminum board and are a little thicker as well.
7’X19″ SWS-1100 35.1 lbs
10″X19″ SWS-1101 51 lbs